Roofers in Lancaster, Morecambe and Surrounding areasMon–Fri 8am - 5pmCall 07304 089169
Coniston · Cumbria · LA21

Chimney Repairs in Coniston

Chimney stacks take the worst of the weather and are one of the most common causes of damp in older homes. We repair, rebuild, cap or remove them safely.

Please send an enquiry first. Coniston is further from our base, so whether we can take on a job here depends on the work involved. Larger projects are usually fine. Tell us what you need and we’ll get back to you quickly.

  • Covered by our Lancaster team
  • Free written quotes
Chimney Stack Repairs in Coniston
Local to Lancaster
Free written quotes
Fully insured
Guaranteed work

Chimney Repairs for Coniston homes

Chimney stacks are a defining feature of homes in Coniston, where slate-built cottages and houses from the village’s mining and quarrying days sit alongside later homes. Most of those houses were built with a fireplace in every room, so there are a lot of stacks to look after. Coniston catches the weather rolling in off the Lakeland fells and Morecambe Bay, so heavy rain and strong winds find any weak point in a slate roof quickly. We repoint, rebuild, re-flash, cap and remove stacks, using materials that match the rest of the building.

Around Kendal and the South Lakes, stone and rendered chimney stacks are part of the character of the area. We repoint in suitable lime mortars and renew leadwork so stacks stay watertight through wet Lakeland winters.

We put up safe access, repoint or rebuild the stack as needed, re-flaunch the pots, and renew the lead flashing so the junction with the roof is watertight. If the chimney is no longer used, we can cap it with a ventilated cap to stop rain and birds getting in, or take the stack down below the roofline and slate over it.

Coniston, Cumbria
Coniston, Cumbria. Photo: Anthony Foster, CC BY-SA 2.0

What’s included

  • Scaffold access to the stack
  • Raking out and repointing in matching mortar
  • Partial or full rebuilding of damaged or leaning stacks
  • New flaunching and re-setting or replacing chimney pots
  • New lead flashing, apron, soakers and back gutter
  • Chimney cowls, bird guards and ventilated caps
  • Removal of redundant stacks and slating over
  • Photo report of all work completed
How it works

Our chimney stack repairs process

  1. Inspection

    We check the stack, flashings and loft for damp.

  2. Quote

    Repair, rebuild, cap or remove — options explained clearly.

  3. Scaffold

    Safe access erected around the stack.

  4. Repair

    Masonry, flaunching and leadwork completed.

  5. Photos & clear-up

    Before-and-after photos and scaffold removed.

FAQs

Chimney Repairs Coniston: FAQs

Do you carry out chimney stack repairs in Coniston?

Yes. We carry out chimney stack repairs across LA21 and nearby areas including Torver, Hawkshead, Ambleside, Bowness-on-Windermere, Windermere.

Do you take on smaller jobs in Coniston?

Coniston is further from our Lancaster base, so whether we can take on smaller jobs depends on the work involved. Send us an enquiry with a few details and photos and we will let you know quickly.

Why is there damp on my chimney breast?

The most common causes are failed lead flashing, cracked flaunching, porous mortar joints or an uncapped chimney letting rain straight in. We inspect from the roof to find the real cause.

Can you remove my chimney stack?

Yes. Redundant stacks can be taken down below the roofline and the roof slated over. If the stack is shared with a neighbour, a party wall agreement is usually needed, and we can explain the process.

Should I cap an unused chimney?

Capping stops rain and birds getting in, but the flue must still be ventilated to avoid condensation and damp. We fit ventilated caps and can advise on vents to the chimney breast inside.

Chimney Repairs in Coniston? Get a free quote

Call 07304 089169 or send us a few details and photos. We’ll get back to you quickly.

Call nowFree quote